Over 2500 size recommendations
Find the right tarpaulin size in three easy steps
If your model year is not on the list, select the motorcycle model of the same type. If the size does not fit, we will of course take the product back or exchange it.
Fill in the fields above to receive recommendations
Instructions: Measure your motorcycle correctly and find the right size of covers
If your bike is converted or you couldn’t find it in our size recommendations, then use our step-by-step guide to find the right size Motorcycle covers by measuring your bike.
Info: Accessories such as tank bags, exhaust systems, footrest extensions, booster seats, crash bars, crash pads, axle protectors and similar conversions fit under the covers and do not usually have to be measured separately. Unless they exceed one of the maximum values to be measured.
The official specifications of the manufacturers are always without license plate holder, mirrors and without windshield.
Better measure yourself to be on the safe side!
Here’s how you do it:
Step 1: Position the motorcycle correctly
- Place your motorcycle on the side stand and not on the main stand so that the rear height can be measured correctly.
- Straighten the handlebars. If necessary, use a wedge or hammer on the tire to hold it in place
The whole thing should then look something like this:
Step 2: Measure motorcycle correctly
Now measure and write down the following dimensions of your vehicle:
- Maximum length
- Maximum front width (handlebar or mirror)
- Maximum front height (mirror or pane)
- Rear height (incl. sissy bar, topca carrier etc.)
- Rear width (please also measure the side license plate holder and side cases)
Rear height including top case: Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
When measuring the height values, make sure that the folding rule and the vehicle are positioned perpendicular to the ground. A little tip: If you sit on the vehicle or hold it straight, especially with choppers, you can measure more easily.
Use the charts below to guide your measurement. Hold your folding rule at the same angle as the marks positioned on the diagrams.
Total length
Tail height
Maximum front height
Maximum front width
Maximum rear width
Then use the following tables to find the right size.
Step 3: Compare your measurements with the dimensions of the MYCOVER® Motorcycle covers
Tip: The dimensions given in the tables are the maximum dimensions of our products.
Understanding table values correctly:
- Length/front width: Your vehicle measurements must be smaller than the values given in the table. This ensures that a vehicle fits under the tarpaulin.
- Height front/height rear: Your vehicle measurements should be approximately equal to or greater than the values given in the table. To prevent the tarpaulin from resting on the floor, the elastic band does the rest for you.
A little tip on ground clearance:
If you calculate the difference between the vehicle height and the height of the covers, you can roughly estimate how much ground clearance the tarpaulin will have. A ground clearance of 5 to 7 cm is often suitable so that the tarpaulin extends approximately to the edge of the wheel rim.
If you can live with it visually, there’s nothing technically wrong with more ground clearance. If in doubt, opt for more ground clearance than a surface-mounted covers. However, the brake disk should not be visible.
Sizes for scooters and choppers (choppers below)
Note on top case sizes (+ TC):
+ TC are our top case sizes. Only buy for vehicles with top case fitted. Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
Size | Length | Front width | Front height | Height tail |
---|---|---|---|---|
XS | 190 | 85 | 115 | 75 |
S | 205 | 90 | 120 | 85 |
M | 215 | 95 | 120 | 100 |
M+ | 215 | 95 | 130 | 90 |
M+ TC | 215 | 95 | 130 | 115 |
L | 235 | 100 | 120 | 100 |
L+ | 235 | 100 | 130 | 90 |
L+ TC | 235 | 100 | 130 | 125 |
L++ | 235 | 100 | 145 | 95 |
L++ TC | 235 | 100 | 145 | 130 |
L+++ | 235 | 100 | 160 | 95 |
XL | 245 | 110 | 135 | 100 |
XL+ | 245 | 110 | 145 | 100 |
XL+ TC | 250 | 115 | 145 | 140 |
XL+ GT | 255 | 110 | 145 | 100 |
XL+ GT +TC | 255 | 115 | 145 | 100 |
XL++ | 245 | 110 | 160 | 100 |
XXL | 260 | 115 | 150 | 90 |
Sizes for choppers
Size | Length | Front width | Front height | Height tail |
---|---|---|---|---|
C-L | 245 | 110 | 110 | 65 |
C-L+ | 255 | 110 | 125 | 65 |
C-L++ | 255 | 110 | 140 | 65 |
C-L+++ | 255 | 110 | 155 | 65 |
C-XL | 260 | 110 | 115 | 65 |
C-XL+ | 260 | 110 | 130 | 65 |
C-XL++ | 270 | 100 | 145 | 70 |
C-XXL-C | 270 | 110 | 150 | 85 |
Unsure which size fits your bike? We are happy to help you and here you can reach us: Contact.
The second skin for your motorcycle
MYCOVER® Premium motorcycle covers
Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit
Easy and fast size selection
- Size recommendations for more than 2000 models
- Over 15 intermediate sizes for all types of motorcycles
Premium quality without compromise
Like thousands of other bikers, trust MYCOVER®
14/06/2020
“A very robust and tear-resistant material: after more than 2 years of continuous use, no cracks, UV damage, or the like. Definitely no comparison to my previous covers!”
03/08/2021
“Finally a waterproof Motorcycle cover that really protects. Even after several heavy rains no problems. Absolutely Top!”
Why MYCOVER®?
Developed by bikers for bikers
Fed up with constantly torn motorcycle covers, we decided in 2018 to develop for our own bikes THE premium cover.
Today, together with our biker community, we develop custom-fit outdoor motorcycle covers for all manufacturers and models.
Our partners
Problems of our biker community
Typical problems with motorcycle “covers”
Material breakage after a short time – Can cause damage & loss of value to the motorcycle
For your motorcycle no compromise!
Choose exclusive motorcycle protection
Our motorcycles deserve real long-term outdoor protection! That is why we have combined special outdoor material with our best features:
- Exclusive outdoor material
Waterproof and breathable for maximum value retention - Strong all-weather protection
UV-resistant and weatherproof with double nano-coating
- 100% durable
Scratch- & tear-resistant 300D material with extra reinforced double seams - Handmade & sewn
By experienced employees for long-term value retention
- Optimum fit
No flapping thanks to perfectly fitting sizes with elasticated hem - Protects the paintwork permanently
Special scratch protection with extra soft inner fleece
- Additional heat protection material
Reduces the risk of heat damage (up to approx. 200°C) - Protects your exhaust
In the lower area of the manifold up to the muffler
- Double ventilation zone
At the height of the exterior mirrors to allow moisture to escape effectively - Optimum air circulation
Prevents waterlogging and helps to prevent rust
- Bright reflectors
Discreetly finished in the seams in a striking design - 360° visibility at night
For optimum reflection from all sides
- Reinforced lock openings
No rubbing plastic or aluminum rings to protect your rims and paintwork - Anti-theft protection on both sides
Attach the lock to the front or rear wheel depending on the parking situation
- 2x sturdy safety straps
Securely fasten the covers to the motorcycle - Protects sensitive components
By minimizing susceptibility to wind and friction on the paint
- License plate window
Approved according to § 10 ABs. 2 GZV and § 23 para. 1 StVO - For every parking space
Suitable and no more towing or parking tickets
Experience the MYCOVER® quality
Probably the last cover you’ll buy!
Optimal fit for your motorcycle
New: Intermediate sizes for all motorcycle types
Tourer • Chopper • Supersports • Naked • Enduro • Scooter
Choose MYCOVER® now
Your bike deserves more than a cheap cover!
Additional information
Frequently asked questions about the MYCOVER® Outdoor Motorcycle Cover
Which motorcycle cover size is right for my motorcycle?
My motorcycle is not rebuilt:
We have measured for you and you will find the right size recommendation for over 2,000 different motorcycle models in our size chart.
We have size recommendations for:
- Standard (factory / original condition)
- Topcase
- Side case
- Side Case & Top Case
- Short license plate holder
- Short mirrors
- Short license plate holder and short mirrors
- High front window
If your bike is not in the list or you have questions about the right size selection: With our personal customer support from bikers for bikers we are happy to help you!
My motorcycle is rebuilt:
If you have modified the original condition of your motorcycle, it may be that you need a different cover size – than indicated in the size recommendation – depending on the type of modification.
Feel free to use the size recommendation in the table as a reference and then see what dimensions have changed with your conversions.
How to measure your motorcycle correctly in three simple steps, we show you here: Measuring a motorcycle correctly
For questions about measuring or general questions, feel free to contact us by email, What’s App, or phone.
Why does the MYCOVER Premium Outdoor Motorcycle Cover cost more than other covers?
To answer the question in a nutshell:
Because other Motorcycle covers often only offer you basic rain protection with many compromises and disadvantages!
Our own experiences with other Motorcycle covers:
Due to our living situation, our first motorcycles had to be parked outside all year round, which is why we absolutely wanted to protect them with a cover tarpaulin to preserve their value: Within only 3 years we have worn out – inconceivable – 9 different motorcycle cover tarpaulins.
As we unfortunately had to find out ourselves, the tarpaulins on the aftermarket often offer only a temporary basic rain protection and (probably for cost reasons) many necessary functions have been skimped on. In the process, we bought not only the tarpaulins of well-known brand manufacturers, but also the so-called “test winners” and “best sellers”:
The result was simply disappointing for us after just a few weeks!
After only a short use, the seams often came loose, the fabric tore, mold on the inside, metal rings caused scratches in the paint and because of the poor fit, the first rust appeared due to standing moisture … One thing we can tell you: This issue has cost us not only unnecessary money, but also a lot of time and nerves!
After talking to biker friends about our experiences, we then quickly realized that we were not alone with this problem.
This is definitely not how we had imagined it for our motorcycles and this is where we had to act!
After almost two years of development, we had then developed an outdoor tarpaulin for our motorcycles without compromise: We have explicitly chosen outdoor fabrics that have been tested for many years and are extremely durable, which are additionally refined with a double nano-coating.
Carefully hand sewn, the unique and distinctive design of the MYCOVERmotorcycle cover is created. One of the design highlights are the reflective stripes that are elaborately incorporated into the seam and run around both sides, which provide reliable 360° visibility protection, not only at night.
With the MYCOVER® outdoor covers, you don’t get basic rain protection, but an exclusive Motorcycle cover with over 10x functions, which are the basic requirement for optimum value retention and theft protection.
Special bikes deserve special protection!
MYCOVER- Protection at its finest
New equipment for chopper sizes (C-…)
We have taken your feedback into account when developing the chopper sizes!
Exclusively soft inner flow and no heat protection material:
In order to protect your sometimes very sensitive special paintwork and powder-coated exhaust systems, for example, even better from scratches, we have dispensed with the internal heat protection in the lower area of our chopper outdoor covers and equipped the chopper outdoor covers exclusively with our soft, paint-protecting inner fleece.
Extra pockets (4x) on the inside for the safety straps:
To protect your special paint even better when putting on the cover, you can now safely store the safety straps in specially made pockets on the inside of the cover and close them with Velcro. More protection for your paint really does not go! After pulling up, you can then drop the safety straps by simply loosening the Velcro from the protective bags again and additionally fix the tarpaulin if necessary.
Extra openings (2x) for your battery charging cable:
Due to the use of alarm systems, the battery of chopper motorcycles must be charged frequently. For this purpose, we have made 30cm long and reclosable openings for your battery charging cable on the right and left side, each at the height of the battery. Charging your battery with the MYCOVER cover has never been so easy!
Why does a motorcycle cover need a license plate window?
AFTER § 10 ABs. 2 GZV and §23 par. 1 StVO, a viewing window for a motorcycle cover is mandatory and is subject to warning in case of non-compliance. Better buy a motorcycle cover with a window for the license plate and save the money of a warning for a tour with your friends!
Does an outdoor motorcycle cover protect against theft?
More than 20,000 two-wheelers are stolen in Germany every year…
The MYCOVER® Motorcycle covers not only protect against prying eyes, but are also equipped with two security openings at the front and rear wheel for the use of your motorcycle lock. If you combine your new MYCOVER® Outdoor Motorcycle covers with a high-quality ABUS lock, for example, this combination offers you excellent theft protection and guarantees quieter nights.
Does the motorcycle cover protect against scratches?
The soft inner lining of the MYCOVER® cover minimizes scratching and contributes to the best possible value retention of your motorcycle.
Our recommendation: Before you use a Motorcycle cover, your motorcycle must be clean (no sand, oil or other dirt, etc.).
Due to the resulting friction when pulling on the motorcycle cover or due to the movement caused by the wind, a dirty motorcycle may cause unintentional damage to paint, plastic parts, mirrors, rims, etc. or damage to the cover. Therefore, clean your motorcycle regularly and look forward to a long shining paint and an optimal value retention.
What is the best way to put the motorcycle cover on the bike?
Step 1: Raise front
- Align the fully spread motorcycle cover according to the vehicle.
- Starting with the front, slip the motorcycle cover over the mirrors and handlebar ends over the front fairing.
- Pull the motorcycle cover apart by the handle at the bottom hem (left and right of the reflector strip) and pull it completely down over the front wheel.
Step 2: Put motorcycle cover over the seat
- Spread the rest of the motorcycle cover over the vehicle (place over the seat).
- Go to the rear of the vehicle.
Step 3: Cover up to the tail
- Pull the motorcycle cover apart by the handle at the bottom hem (left and right of the reflector strip).
- Put the tarpaulin completely over the license plate and the rear tire.
What prevents the outdoor motorcycle cover from being blown away by the wind?
Due to the two safety belts of the MYCOVER® motorcycle cover (in front of the rear wheel and behind the front wheel), the fabric adapts perfectly to the shape of your motorcycle.
A good fit not only looks visually much better and prevents the annoying fluttering in the wind, but also ensures a minimization of wind susceptibility (danger of tipping over by wind), as well as less friction on your motorcycle.
Only a properly fitting motorcycle cover can protect your bike in the long term!
How do I properly care for the motorcycle cover?
Important not to damage the double nano-coating of the motorcycle cover: No cleaning agents or similar should be used for cleaning.
We recommend wiping the motorcycle cover with lukewarm water only.
- The outdoor motorcycle cover must not be left on the ground to dry.
- We recommend using two outdoor chairs or a long clothesline.
- Improper drying, e.g. using clothespins (sharp edges), a dryer or similar can damage the motorcycle cover. Be careful when cleaning the license plate viewing window (prone to scratching).
How do I get the outdoor motorcycle cover back neatly into the transport bag?
The scope of delivery of the motorcycle cover includes a transport bag.
Before the motorcycle cover can be stored or transported, it must be completely dry and clean.
Dirt and moisture can lead to the formation of mold or damage to the cover or packaging. Do not fold or bend the cover at the license plate window or ventilation ears as irreversible damage may be caused.
Our recommendation: When folding the cover for the transport bag, you should start with the license plate window so that it is not creased in the transport bag:
What should I look for when comparing outdoor motorcycle covers?
- To protect against rust, outdoor tarpaulin should be not only waterproof, but also breathable.
- Make sure you have adequate UV protection to keep the plastics, rubber components and paint from fading.
- For protection in winter and summer, the material must be cold and heat stable.
- To protect the paint from bumps and scratches, look for a durable material with an adequately lined, cotton-like inner fleece.
- AFTER § 10 ABs. 2 GZV and §23 par. 1 StVO, a license plate window / viewing window is mandatory and is subject to warning in the event of non-compliance. Better save the money for a tour with your friends!
- Make sure that the Motorcycle cover is dirt-repellent. For example, through a coating. This additionally protects the value retention and facilitates cleaning.
- Even with a Motorcycle covers your motorcycle must be clearly visible to other road users. Reflectors or reflective fabrics significantly improve visibility at night!
- Ensure a good fit, e.g. with an elastic hem, to minimize susceptibility to wind and friction between the Motorcycle covers and the motorcycle.
- Look at additional fuses against wind. For example, by means of safety belts or other holders.
- A properly positioned heat shield material can not only protect against a warm exhaust or engine, but also significantly reduce moisture absorption from the ground.
We recommend using a housse not only for outdoor use. Also in the garage, underground garage or carport, this reliably protects against dust, dirt, scratches and bumps.
Don’t save at the wrong end!
I want to protect my motorcycle as best as possible with a motorcycle cover. What should I pay attention to?
We have been dealing for several years (professionally and privately) with the value preservation and theft protection of our motorcycles.
We firmly believe that a high-quality Motorcycle cover can reliably protect your motorcycle in any parking situation. We have compiled all our knowledge for you in our Motorcycle cover advisor.
You can find more information in the instructions for use and safety instructions (PDF) for our outdoor Motorcycle covers.
MYCOVER® outdoor products:
MYCOVER® indoor products:
MYCOVER® all products:
Personal advice from bikers for bikers
Before you contact us, please check if there is already a current recommendation for your bike: > Here to the size recommendation <
We are available for you by WhatsApp (by chat) and by email. Please do not double request, we will reply within 48 hours:
A
Andreas42
Ducati Panigale V4
The search has finally come to an end, clear 5/5 stars
Verified owner
Größe: M
Before that, I had already worn out three covers. The last one hadn’t even lasted 3 months before the seams came undone…. From the outdoor we have already bought the second, first for my sports bike and now for my brother’s touring bike. If you want premium, you will not get past Mycover, absolutely top!
M
Marcel1R
Super guys !!!!!
Verified owner
This is not China garbage.
B
Biker-f3560b
Really recommendable!
Verified owner
Größe: XL+
Meanwhile, we have in the “motorcycle enthusiast family” 4 pieces of covers from you.
G
Gonzol
BMW 1250 GS
Quality
Verified owner
Größe: XL+
Have a BMW 1250 GS and for this vehicle bought a XL+ hood from Mycover.
Today after 2 years I can say that the quality, durability and robustness as described by Mycover is true.
I unfortunately have no garage and my bike is always on the same forecourt at the house in the blazing sun, (plastic parts on the GS).
already bleached out slightly because of the blazing sun.
My hood should be at least UV-resistant, breathable, robust, so all wishes fulfilled.
My motorcycle had survived the whole winter and summer without moisture and UV damage, so, I can confirm for myself that this is
is an excellent product that I had wanted for a very long time.
Previously I had bought ( 5 different) protective covers, including one from BMW, but all did not fulfill my purposes or only to a limited extent.
Thank you, Mycover!
A
Alexander
BMW S1000XR, 2015
BMW S1000XR 2015 - Fits like a second skin 1A++ of quality
Größe: XL+
I have had many tarpaulins, very expensive and very cheap. The only difference so far what the price, but the quality felt always the same garbage bag. I heard about MyCover from a buddy who lives in HH (I’m PI myself *sorry*) 🙂
The XL+ tarp fits my BMW S1000XR like a glove. The fabric and stitching are of the finest quality. Even in strong winds (today is storm in HH and PI 29.01.2022), the tarp remains very stable on the machine and does not flutter a bit (I’m looking out the window right now). Heavy rain can the tarp off without any problems and the moped remains absolutely dry. The typical problem with condensation has not reoccurred with me so far. Now if the UV resistance is also as good as the rest, this is the best tarp you can buy. I definitely recommend your product. Ps. The bag is really awesome !
M
Max
BMW F850GS, 2021
Top quality, premium cover and price / performance 1A
Verified owner
Größe: XL+
The cover from MyCover in size XL+ is made for my BMW F850 GS. After many “cheap” covers, which lasted at most 1 year and never promised what the manufacturer stated, I came to MyCover. Price / performance is TOP here, the quality of the hood is perfect and it keeps what it promises. Wind and weather cannot harm it, the motorcycle stays dry and it is optimally protected against any environmental influences. In addition, the lacquer is optimally protected by soft inner material against scratches and holograms during application/removal. At night, if the motorcycle is not on your own property, it is perfectly illuminated by the attached reflectors, so you can not miss them. Shipping was super fast and the hood came neatly delivered. I am really very excited and glad that my bike is now so well protected outside. I can only recommend it to every motorcycle lover to get such a hood!
C
Christina F.
Vespa GTS300, 2023
housse for Vespa GTS 300
Verified owner
Größe: M+
While looking for a housse for my new Vespa GTS 300, I came across MYCOVER and the description of the cover was very promising. I think it’s great that you can specify the model of your vehicle and the right cover is displayed. So I ordered the M+. Shipping was quick and it actually fits like a glove. The quality is really great and you can see that someone has put a lot of thought into the durability, paint protection and ventilation. I am very satisfied and my beloved Vespa is now well protected.
D
Dieter
Yamaha FJR 1300 A, 2009
Finally the right one!
Verified owner
Größe: XL+
After initial skepticism due to the not inconsiderable price, I ordered it because I love my scooter. And I was pleasantly surprised. If the service life lives up to the initial visual and tactile impression, then the cover is definitely worth the money. And it fits like it was made for my bike.
r
royal enfield-Biker
royal enfield interceptor 650, 2020
my first impression:
Verified owner
Größe: L+
The tarpaulin makes a very high-quality impression when I compare it with the ones I have used so far. However, I don’t think a real assessment will be possible until the coming winter is over. But I am hopeful in view of the first impression.