Premium scooter covers for your Malaguti from MYCOVER®

Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit

MYCOVER Motorcycle cover also for Aprilia, the protection for your motorcycle

The MYCOVER® scooter cover makes no compromises when it comes to protecting your scooter. An exclusive cover sewn by hand and equipped with 10x sophisticated functions.

Easy selection of the right size thanks to recommendations for over 1,300 motorcycle models and over 15 intermediate sizes for all scooters.

MYCOVER® – Protection at its finest: 360° all-round protection for your motorcycle!

Interactive size recommendation

3 steps to the right size of covers for your Malaguti scooter

Choose your scooter from over 1,300 models and get the right size recommendation for the premium outdoor scooter covers from MYCOVER® in 3 simple steps.

In addition to factory condition, we also cover conversions for some vehicles with our interactive size recommendations. Rarely is it so easy to buy the right covers!

MYCOVER® – Protection at its finest

My manufacturer is not in the list

  If your model year is not on the list, select the motorcycle model of the same type. If the size does not fit, we will of course take the product back or exchange it.

My model is not in the list

Fill in the fields above to receive recommendations

Instructions: Measure your motorcycle correctly and find the right size of covers

If your bike is rebuilt or you couldn’t find it in our size recommendations, use our step by step guide to find the right cover size by measuring your bike.

Attention! Accessories such as tank bags, side cases, exhaust systems, footrest extensions, booster seats, crash bars, crash pads, axle protectors and similar conversions, fit under the cover.

Correctly measure the motorcycle

The official specifications of the manufacturers are always without license plate holder, mirrors and without windshield.

Better measure yourself to be on the safe side!

Here’s how you do it:

Step 1: Position the motorcycle correctly

  1. Place your motorcycle on the side stand and not on the main stand so that the rear height can be measured correctly.
  2. Straighten the handlebars. Use a wedge or hammer on the tire as a fixation if necessary

The whole thing should then look something like this:

Step 2: Measure motorcycle correctly

Now measure and write down the following dimensions of your vehicle:

  • Maximum length
  • Maximum front width (handlebar or mirror)
  • Maximum front height (mirror or pane)
  • Rear height (incl. sissy bar, topca carrier etc.)
  • Rear width (only relevant for choppers – please measure the side license plate holder as well)

When measuring the height values, make sure that the folding rule and the vehicle are positioned perpendicular to the ground. Small tip: If you sit on the vehicle or hold it straight, you can measure more easily.

Use the charts below to guide your measurement. Hold your folding rule at the same angle as the marks positioned on the diagrams.

Total length

Tail height

Maximum front height

Maximum front width

Maximum rear width

Then use the following tables to find the right size.

Step 3: Compare your measurements with the MYCOVER® motorcycle cover dimensions

Tip: The dimensions given in the tables are the maximum dimensions of our products.


Length/front width: Your measurements must be smaller than the values given in the table.

Height front/rear: Your measurements should be equal to or greater than the values given in the table.

Sizes for Tourer, Sportsman, Topcase (TC) etc.

SizeLengthFront widthFront heightHeight tailMax tail width
M+ TC2159513011580
L 23510012010090
XL+ 245110145100105
XL+ TC250115145140105
XL+ GT255110145100120
XL+ GT +TC255115145100120
All dimensions in cm, dimensions of the transport bag: 38x10x30cm

Chopper sizes

SizeLengthFront widthFront heightHeight tailMax tail width
All dimensions in cm, dimensions of the transport bag: 38x10x30cm

Unsure which size fits your bike? We are happy to help you and here you can reach us: Contact.

The premium outdoor scooter tarpaulin also for Malaguti scooters

Suitable for your Malaguti: The MYCOVER® scooter cover

With the MYCOVER® scooter cover, your Malaguti is protected from moisture, dirt and UV radiation all year round. Also perfect as additional indoor or outdoor protection for your carport and garage against dirt, dust and unwanted scratches.

Exclusive scooter covers for your Malaguti

The scooter cover for value retention & theft protection, also suitable for your Malaguti model

MYCOVER®: Exactly the protection your bike needs!

Our stylish scooter covers from MYCOVER® Protection also provide optimum protection for exclusive Malaguti scooters and preserve their special paintwork and components in the best possible way.

Our scooter covers are subject to the strictest internal criteria and protect, for example, the Drakon 250 (2022) or the XSM 50 Supermoto in size M+, as well as the Dune 125 Adventure in size XL+.

MYCOVER® Scooter covers

A high-quality scooter deserves a high-quality scooter cover

When you ride a Malaguti, you can feel the Italian passion for design and quality.

For optimum value retention, we have developed the indoor and outdoor scooter tarpaulin for 360° protection. The MYCOVER Premium Outdoor scooter covers also offer your Malaguti optimum protection against moisture, dirt and scratches.

Well thought-out down to the last detail and equipped with 10 important functions to protect your Malaguti. The MYCOVER® scooter cover for the whole year!


About Malaguti

The original Italian motorcycle manufacturer Malaguti, based in Bologna, was acquired by the Austrian KSR Group in 2018, but remains true to the spirit of Bologna with Italian design and production. Their motorcycles exude pure dynamism, feature comfortable handling and are light as a feather to offer their customers the best riding experience.