Premium Motorcycle covers for your Buell from MYCOVER®
Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit
The MYCOVER® Motorcycle Cover makes no compromises when it comes to protecting your motorcycle. An exclusive cover sewn by hand and equipped with 10x sophisticated functions.
Easy selection of the right size thanks to recommendations for over 2,500 motorcycle models and over 25 intermediate sizes for all motorcycles and scooters.
MYCOVER® – Protection at its finest: 360° all-round protection for your motorcycle!
Interactive size recommendation
3 steps to the right size of covers for your Buell motorcycle
Choose your motorcycle from over 1,300 models and get the right size recommendation for the premium outdoor Motorcycle covers from MYCOVER® in 3 simple steps.
In addition to factory condition, we also cover conversions for some vehicles with our interactive size recommendations. Rarely is it so easy to buy the right covers!
MYCOVER® – Protection at its finest
If your model year is not on the list, select the motorcycle model of the same type. If the size does not fit, we will of course take the product back or exchange it.
Fill in the fields above to receive recommendations
Instructions: Measure your motorcycle correctly and find the right size of covers
If your motorcycle is converted or you couldn’t find it in our size recommendations, then use our step-by-step guide to find the right covers size by measuring your motorcycle.
Info: Accessories such as tank bags, exhaust systems, footrest extensions, booster seats, crash bars, crash pads, axle protectors and similar conversions fit under the covers and do not usually have to be measured separately. Unless they exceed one of the maximum values to be measured.
The official specifications of the manufacturers are always without license plate holder, mirrors and without windshield.
Better measure yourself to be on the safe side!
Here’s how you do it:
Step 1: Position the motorcycle correctly
- Place your motorcycle on the side stand and not on the main stand so that the rear height can be measured correctly.
- Straighten the handlebars. If necessary, use a wedge or hammer on the tire to hold it in place
The whole thing should then look something like this:
Step 2: Measure motorcycle correctly
Now measure and write down the following dimensions of your vehicle:
- Maximum length
- Maximum front width (handlebar or mirror)
- Maximum front height (mirror or pane)
- Rear height (incl. sissy bar, topca carrier etc.)
- Rear width (please also measure the side license plate holder and side cases)
Rear height including top case: Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
When measuring the height values, make sure that the folding rule and the vehicle are positioned perpendicular to the ground. A little tip: If you sit on the vehicle or hold it straight, especially with choppers, you can measure more easily.
Use the charts below to guide your measurement. Hold your folding rule at the same angle as the marks positioned on the diagrams.
Total length
Tail height
Maximum front height
Maximum front width
Maximum rear width
Then use the following tables to find the right size.
Step 3: Compare your measurements with the dimensions of the MYCOVER® Motorcycle covers
Tip: The dimensions given in the tables are the maximum dimensions of our products.
Understanding table values correctly:
- Length/front width: Your vehicle measurements must be smaller than the values given in the table. This ensures that a vehicle fits under the tarpaulin.
- Height front/height rear: Your vehicle measurements should be approximately equal to or greater than the values given in the table. To prevent the tarpaulin from resting on the floor, the elastic band does the rest for you.
A little tip on ground clearance:
If you calculate the difference between the vehicle height and the height of the covers, you can roughly estimate how much ground clearance the tarpaulin will have. A ground clearance of 5 to 7 cm is often suitable so that the tarpaulin extends approximately to the edge of the wheel rim.
If you can live with it visually, there’s nothing technically wrong with more ground clearance. If in doubt, opt for more ground clearance than a surface-mounted covers. However, the brake disk should not be visible.
Sizes for scooters and choppers (choppers below)
Note on top case sizes (+ TC):
+ TC are our top case sizes. Only buy for vehicles with top case fitted. Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
| Size | Length | Front width | Front height | Height tail |
|---|---|---|---|---|
| XS | 190 | 85 | 115 | 75 |
| S | 205 | 90 | 120 | 85 |
| M | 215 | 95 | 120 | 100 |
| M+ | 215 | 95 | 130 | 90 |
| M+ TC | 215 | 95 | 130 | 115 |
| L | 235 | 100 | 120 | 100 |
| L+ | 235 | 100 | 130 | 90 |
| L+ TC | 235 | 100 | 130 | 125 |
| L++ | 235 | 100 | 145 | 95 |
| L++ TC | 235 | 100 | 145 | 130 |
| L+++ | 235 | 100 | 160 | 95 |
| XL | 245 | 110 | 135 | 100 |
| XL+ | 245 | 110 | 145 | 100 |
| XL+ TC | 250 | 115 | 145 | 140 |
| XL+ GT | 255 | 110 | 145 | 100 |
| XL+ GT +TC | 255 | 115 | 145 | 100 |
| XL++ | 245 | 110 | 160 | 100 |
| XXL | 260 | 115 | 150 | 90 |
Sizes for choppers
| Size | Length | Front width | Front height | Height tail |
|---|---|---|---|---|
| C-L | 245 | 110 | 110 | 65 |
| C-L+ | 255 | 110 | 125 | 65 |
| C-L++ | 255 | 110 | 140 | 65 |
| C-L+++ | 255 | 110 | 155 | 65 |
| C-XL | 260 | 110 | 115 | 65 |
| C-XL+ | 260 | 110 | 130 | 65 |
| C-XL++ | 270 | 100 | 145 | 70 |
| C-XXL-C | 270 | 110 | 150 | 85 |
Unsure which size fits your bike? We are happy to help you and here you can reach us: Contact.
The premium outdoor Motorcycle cover also for Buell motorcycles
Suitable for your Buell: The MYCOVER® Motorcycle cover
The MYCOVER® motorcycle cover protects your Buell from moisture, dirt and UV radiation all year round. Also perfect as additional indoor or outdoor protection for your carport and garage against dirt, dust and unwanted scratches. A high-quality Motorcycle cover serves as a Motorcycle cover to protect the motorcycle from the weather and can also be used as motorcycle weather protection. In heavy rain, the Motorcycle cover provides optimum protection for the motorcycle, as the Motorcycle covers are absolutely waterproof.
Select model and receive size recommendation
Choose your model and get one step closer to your premium covers from MYCOVER®
1125CR
1125R
Battlewin RR 1000
Blast
Cyclone M2
Firebolt XB9R
Firebolt XB12R
Lightning Long XB12Ss
Lightning S1
Lightning Super TT
Lightning X1
Lightning XB9S
Lightning XB9SX
Lightning XB12S
Lightning XB12scg
RW 750
Thunderbolt S3
Ulysses Touring XB12XT
Ulysses XB 12 X
Westwind RSS 1200
XB 12
XBRR
Exclusive Motorcycle covers for your Buell
The Motorcycle cover for value retention & theft protection, also suitable for your Buell model
Our stylish Motorcycle covers from MYCOVER® Protection also provide optimum protection for exclusive Buell motorcycles and preserve their special paintwork and components in the best possible way.
Our motorcycle covers are subject to the strictest internal criteria and protect the Buell Firebolt XB9R in size M and the Lightning XB9S and Lightning XB12S in size S, for example.
MYCOVER® Motorcycle covers
A high-quality motorcycle deserves a high-quality Motorcycle covers.
When you ride a Buell, you can feel the Italian passion for design and quality.
For optimum value retention, we have developed the indoor and outdoor Motorcycle cover for 360° protection. The MYCOVER Premium Outdoor Motorcycle covers also offer your Buell optimum protection against moisture, dirt and scratches.
Well thought-out down to the last detail and equipped with 10 important functions to protect your Buell. The MYCOVER® Motorcycle cover for the whole year!
The motorcycle cover offers excellent outdoor motorcycle protection and also acts as a durable Motorcycle covers.
Motorcycle covers keep your motorcycle dry even in heavy rain, as these motorcycle covers are extremely durable.
History
About Buell
The Buell Motorcycle Company, founded by the renowned racing driver and engineer Erik Buell, made its mark on the motorcycle world with the support of Harley-Davidson. Despite the end of Buell production in 2009, the legacy lives on through Erik Buell Racing (EBR), which produces exclusive racing motorcycles and road models such as the 1190RX. Whether you own a classic Buell or are the proud owner of a newer EBR model, our Motorcycle covers are the ideal solution to keep your bike in top condition.