Over 2000 size recommendations
Find the right tarpaulin size in three easy steps
If your model year is not on the list, select the motorcycle model of the same type. If the size does not fit, we will of course take the product back or exchange it.
Fill in the fields above to receive recommendations
Instructions: Measure your scooter correctly and find the right size of covers
If your bike is rebuilt or you couldn’t find it in our size recommendations, use our step by step guide to find the right cover size by measuring your bike.
Attention! Accessories such as tank bags, side cases, exhaust systems, footrest extensions, booster seats, crash bars, crash pads, axle protectors and similar conversions, fit under the cover.
Correctly measure the motorcycle
The official specifications of the manufacturers are always without license plate holder, mirrors and without windshield.
Better measure yourself to be on the safe side!
Here’s how you do it:
Step 1: Position the motorcycle correctly
- Place your motorcycle on the side stand and not on the main stand so that the rear height can be measured correctly.
- Straighten the handlebars. Use a wedge or hammer on the tire as a fixation if necessary
The whole thing should then look something like this:
Step 2: Measure motorcycle correctly
Now measure and write down the following dimensions of your vehicle:
- Maximum length
- Maximum front width (handlebar or mirror)
- Maximum front height (mirror or pane)
- Rear height (incl. sissy bar, topca carrier etc.)
- Rear width (only relevant for choppers – please measure the side license plate holder as well)
When measuring the height values, make sure that the folding rule and the vehicle are positioned perpendicular to the ground. Small tip: If you sit on the vehicle or hold it straight, you can measure more easily.
Use the charts below to guide your measurement. Hold your folding rule at the same angle as the marks positioned on the diagrams.
Total length
Tail height
Maximum front height
Maximum front width
Maximum rear width
Then use the following tables to find the right size.
Step 3: Compare your measurements with the MYCOVER® motorcycle cover dimensions
Tip: The dimensions given in the tables are the maximum dimensions of our products.
Notes:
Length/front width: Your measurements must be smaller than the values given in the table.
Height front/rear: Your measurements should be equal to or greater than the values given in the table.
Sizes for Tourer, Sportsman, Topcase (TC) etc.
Size | Length | Front width | Front height | Height tail | Max tail width |
---|---|---|---|---|---|
S | 205 | 90 | 120 | 85 | 85 |
M | 215 | 95 | 120 | 100 | 85 |
M+ | 215 | 95 | 130 | 90 | 85 |
M+ TC | 215 | 95 | 130 | 115 | 80 |
L | 235 | 100 | 120 | 100 | 90 |
L+ | 235 | 100 | 130 | 90 | 90 |
L++ | 235 | 100 | 145 | 95 | 90 |
L+++ | 235 | 100 | 160 | 95 | 90 |
XL | 245 | 110 | 135 | 100 | 105 |
XL+ | 245 | 110 | 145 | 100 | 105 |
XL+ TC | 250 | 115 | 145 | 140 | 105 |
XL+ GT | 255 | 110 | 145 | 100 | 120 |
XL+ GT +TC | 255 | 115 | 145 | 100 | 120 |
XL++ | 245 | 110 | 160 | 100 | 105 |
XXL | 260 | 115 | 150 | 90 | 125 |
Chopper sizes
Size | Length | Front width | Front height | Height tail | Max tail width |
---|---|---|---|---|---|
C-L | 245 | 110 | 110 | 65 | 75 |
C-L+ | 255 | 110 | 125 | 65 | 75 |
C-L++ | 255 | 110 | 140 | 65 | 75 |
C-L+++ | 255 | 110 | 155 | 65 | 75 |
C-XL | 260 | 110 | 115 | 65 | 85 |
C-XL+ | 260 | 110 | 130 | 65 | 85 |
C-XL++ | 270 | 100 | 145 | 70 | 85 |
C-XXL-C | 270 | 110 | 150 | 85 | 85 |
Unsure which size fits your bike? We are happy to help you and here you can reach us: Contact.
The second skin for your scooter
MYCOVER® Premium scooter covers
Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit
Easy and fast size selection
- Size recommendations for more than 2000 models
- Over 25 intermediate sizes for all two-wheeler types
Premium quality without compromise
Like thousands of other bikers, trust MYCOVER®
14/06/2020
“Ein sehr robustes und reißfestes Material: Nach über 2 Jahren Dauereinsatz keine Risse, UV-Schäden, oder ähnliches. Definitiv kein Vergleich zu meinen bisherigen Abdeckplanen!”
03/08/2021
“Endlich eine wasserdichte Abdeckplane die wirklich schützt. Auch nach mehreren starken Regenfälle keinerlei Probleme. Absolut Top!”
Why MYCOVER®?
Developed by bikers for bikers
Fed up with constantly torn covers, we decided in 2018 to develop THE premium covers for our own bikes.
Today, together with our biker community, we develop custom-fit outdoor covers for all makes and models.
Our partners
Problems of our biker community
Typical problems with scooter “covers”
Material breakage after a short time – Can cause damage & loss of value to the scooter
No compromises for your scooter!
Opt for exclusive scooter protection
Our scooters deserve real long-term outdoor protection! That is why we have combined special outdoor material with our best features:
- Exclusive outdoor material
Waterproof and breathable for maximum value retention - Strong all weather protection
UV resistant and weatherproof with double nano coating
- 100% Resistant
Scratch & tear resistant 300D material with extra reinforced double seams - Handmade & sewn
From experienced employees for long-term value retention
- Optimal fit
No flapping due to perfect fit sizes with elastic hemline - Protects the paint permanently
Special scratch protection with extra soft inner fleece
- Additional heat protection material
Reduces the risk of heat damage (up to approx. 200°C) - Protects your exhaust
In the lower area of the manifold up to the end muffler
- Double ventilation zone
At the level of the exterior mirrors to allow moisture to escape effectively - Optimal air circulation
Prevents waterlogging and helps prevent rust
- Bright reflectors
Discreetly finished in the seams in a striking design - 360° visibility at night
For optimal reflection from all sides
- Reinforced lock openings
Without rubbing plastic or aluminum rings protect your rims and paint - Theft protection on both sides
Depending on the parking situation, attach the lock to the front or rear wheel
- 2x Sturdy safety belts
Securely attach the covers to the scooter - Protects sensitive components
By minimizing the susceptibility to wind and friction on the coating
- license plate window
Approved according to § 10 ABs. 2 GZV and § 23 para. 1 StVO - For each parking lot
Suitable and no more towing or parking ticket
Experience the MYCOVER® quality
Probably the last cover you’ll buy!
Optimum fit for your scooter
New: Intermediate sizes for all motorcycle types
Tourer • Chopper • Supersports • Naked • Enduro • Scooter
Choose MYCOVER® now
Your bike deserves more than a cheap cover!
Additional information
Frequently asked questions about the MYCOVER® outdoor scooter tarpaulin
Which scooter covers size is the right one for my scooter?
My scooter has not been converted:
We have measured for you and you will find the right size recommendation for over 2,000 different two-wheeler models in our size chart.
We have size recommendations for:
- Standard (factory / original condition)
- Topcase
- Side case
- Side Case & Top Case
- Short license plate holder
- Short mirrors
- Short license plate holder and short mirrors
- High front window
If your scooter is not on the list or you have questions about the right size selection: We will be happy to help you with our personal customer support from bikers for bikers!
My scooter has been converted:
If you have modified the original condition of your scooter, you may need a different size of covers than specified in the size recommendation, depending on the type of conversion.
Feel free to use the size recommendation in the table as a reference and then see what dimensions have changed with your conversions.
Here we show you how to measure your scooter correctly in three simple steps: Measure your scooter correctly
For questions about measuring or general questions, feel free to contact us by email, What’s App, or phone.
Why does the MYCOVER Premium Outdoor scooter cover cost more than other covers?
To answer the question in a nutshell:
Because other scooter covers often only offer you basic rain protection with many compromises and disadvantages!
Our own experiences with other scooter tarpaulins:
Due to our living situation, our first motorcycles had to be parked outside all year round, which is why we absolutely wanted to protect them with a cover tarpaulin to preserve their value: Within only 3 years we have worn out – inconceivable – 9 different motorcycle cover tarpaulins.
As we unfortunately had to find out ourselves, the tarpaulins on the aftermarket often offer only a temporary basic rain protection and (probably for cost reasons) many necessary functions have been skimped on. In the process, we bought not only the tarpaulins of well-known brand manufacturers, but also the so-called “test winners” and “best sellers”:
The result was simply disappointing for us after just a few weeks!
After only a short use, the seams often came loose, the fabric tore, mold on the inside, metal rings caused scratches in the paint and because of the poor fit, the first rust appeared due to standing moisture … One thing we can tell you: This issue has cost us not only unnecessary money, but also a lot of time and nerves!
After talking to biker friends about our experiences, we then quickly realized that we were not alone with this problem.
This was definitely not what we had in mind for our vehicles and we had to take action!
After almost two years of development, we had developed an outdoor covers without compromise: We explicitly opted for outdoor fabrics that have been tested over many years and are extremely hard-wearing, which are also finished with a double nano-coating.
The unique and striking design of the MYCOVER® scooter covers is carefully sewn by hand. One of the design highlights are the reflective stripes that are elaborately incorporated into the seam and run around both sides, which provide reliable 360° visibility protection, not only at night.
With the MYCOVER® outdoor covers, you don’t get basic rain protection, but an exclusive moped cover with over 10x functions, which are the basic requirement for optimum value retention and theft protection.
Special bikes deserve special protection!
MYCOVER- Protection at its finest
New equipment for chopper sizes (C-…)
We have taken your feedback into account when developing the chopper sizes!
Exclusively soft inner flow and no heat protection material:
In order to protect your sometimes very sensitive special paintwork and powder-coated exhaust systems, for example, even better from scratches, we have dispensed with the internal heat protection in the lower area of our chopper outdoor covers and equipped the chopper outdoor covers exclusively with our soft, paint-protecting inner fleece.
Extra pockets (4x) on the inside for the safety straps:
To protect your special paint even better when putting on the cover, you can now safely store the safety straps in specially made pockets on the inside of the cover and close them with Velcro. More protection for your paint really does not go! After pulling up, you can then drop the safety straps by simply loosening the Velcro from the protective bags again and additionally fix the tarpaulin if necessary.
Extra openings (2x) for your battery charging cable:
Due to the use of alarm systems, the battery of chopper motorcycles must be charged frequently. For this purpose, we have made 30cm long and reclosable openings for your battery charging cable on the right and left side, each at the height of the battery. Charging your battery with the MYCOVER cover has never been so easy!
Why does a scooter cover need a license plate window?
AFTER § 10 ABs. 2 GZV and §23 par. 1 StVO, a viewing window for a scooter cover is mandatory and a warning can be issued in the event of non-compliance. Better buy a scooter covers with a window for the license plate and save the money of a warning for a tour with your friends!
Does an outdoor scooter cover protect against theft?
More than 20,000 two-wheelers are stolen in Germany every year…
The MYCOVER® scooter covers not only protect against prying eyes, but are also equipped with two security openings on the front and rear wheel for the use of your Abus lock. If you combine your new MYCOVER® outdoor moped tarpaulin with a high-quality ABUS lock, for example, this combination offers you excellent theft protection and guarantees quieter nights.
Does the scooter covers protect against scratches?
The soft inner lining of the MYCOVER® covers minimizes scratching and contributes to the best possible value retention of your scooter.
Our recommendation: Before you use a scooter cover, your scooter must be clean (no sand, oil or other dirt, etc.).
The friction generated when pulling on the scooter cover or the movement caused by the wind can result in unintentional damage to the paintwork, plastic parts, mirrors, rims, etc. or damage to the cover if the scooter is dirty. Therefore, clean your scooter regularly and look forward to a long-lasting radiant paintwork and optimal value retention.
What is the best way to put the scooter cover on the scooter?
Step 1: Raise front
- Align the fully unfolded scooter covers with the vehicle.
- Starting with the front, put the scooter cover over the mirrors and handlebar ends over the front fairing.
- Pull the scooter covers apart using the handle on the lower hem (to the left and right of the reflector strip) and pull it completely down over the front wheel.
Step 2: Place the scooter cover over the seat
- Spread the rest of the scooter cover over the vehicle (over the seat).
- Go to the rear of the vehicle.
Step 3: Cover up to the tail
- Pull the scooter tarpaulin apart using the handle on the lower hem (to the left and right of the reflector strip).
- Put the tarpaulin completely over the license plate and the rear tire.
What prevents the outdoor scooter cover from being blown away by the wind?
The two safety belts on the MYCOVER® scooter cover (in front of the rear wheel and behind the front wheel) allow the fabric to adapt perfectly to the shape of your scooter.
A good fit not only looks much better and prevents annoying flapping in the wind, but also minimizes susceptibility to wind (risk of tipping over due to wind) and reduces friction on your scooter.
Only a properly fitting scooter cover can protect your bike in the long term!
How do I care for the scooter cover properly?
Important to avoid damaging the double nano-coating of the roller cover: No cleaning agents or similar may be used for cleaning.
We recommend wiping the scooter tarpaulin with lukewarm water only.
- The outdoor scooter cover must not be left on the floor to dry.
- We recommend using two outdoor chairs or a long clothesline.
- Improper drying, e.g. using clothespins (sharp edges), a dryer or similar, can damage the scooter covers. Be careful when cleaning the license plate viewing window (prone to scratching).
How do I get the outdoor scooter covers neatly back into the transport bag?
The scooter covers are supplied with a transport bag.
Before the scooter tarpaulin can be stored or transported, it must be completely dry and clean.
Dirt and moisture can lead to the formation of mold or damage to the cover or packaging. Do not fold or bend the cover at the license plate window or ventilation ears as irreversible damage may be caused.
Our recommendation: When folding the cover for the transport bag, you should start with the license plate window so that it is not creased in the transport bag:
What should I look out for when comparing outdoor scooter covers?
- To protect against rust, outdoor tarpaulin should be not only waterproof, but also breathable.
- Make sure you have adequate UV protection to keep the plastics, rubber components and paint from fading.
- For protection in winter and summer, the material must be cold and heat stable.
- To protect the paint from bumps and scratches, look for a durable material with an adequately lined, cotton-like inner fleece.
- AFTER § 10 ABs. 2 GZV and §23 par. 1 StVO, a license plate window / viewing window is mandatory and is subject to warning in the event of non-compliance. Better save the money for a tour with your friends!
- Make sure that the scooter cover is dirt-repellent. For example, through a coating. This additionally protects the value retention and facilitates cleaning.
- Even with a housse, your scooter must be clearly visible to other road users. Reflectors or reflective fabrics significantly improve visibility at night!
- Ensure a good fit, e.g. with an elastic hem, to minimize susceptibility to wind and friction between the covers and scooter.
- Look at additional fuses against wind. For example, by means of safety belts or other holders.
- A properly positioned heat shield material can not only protect against a warm exhaust or engine, but also significantly reduce moisture absorption from the ground.
We recommend using a housse not only for outdoor use. Also in the garage, underground garage or carport, this reliably protects against dust, dirt, scratches and bumps.
Don’t save at the wrong end!
I would like to protect my scooter in the best possible way with a scooter cover. What should I pay attention to?
We have been dealing with the value retention and theft protection of our vehicles for several years (both professionally and privately).
We firmly believe that a high-quality scooter cover can reliably protect your scooter in any parking situation. We have compiled all our knowledge for you in our Motorcycle cover advisor.
You can find more information in the instructions for use and safety instructions (PDF) for our outdoor scooter covers.
Personal advice from bikers for bikers
Before you contact us, please check if there is already a current recommendation for your bike: > Here to the size recommendation <
We are available for you by WhatsApp (by chat) and by email. Please do not double request, we will reply within 48 hours:
There are no reviews yet.