Motorcycle cover for Moto Morini

Using our size finder, you select the manufacturer and model and immediately see the right size for the standard setup. Directly below that, you’ll find recommendations for common modifications such as a top case or tall windscreen. No measuring needed.

Select your X-Cape 700 in the size finder, and you’ll see the size for the standard setup and, right next to it, the recommendation for the version with a top case. If your modification isn’t listed, you can submit a size request and get an individual recommendation.

Let the headers and exhaust cool down first—around 20 minutes is enough after a normal ride. The heat protection on the underside shields the hot components, but that short wait is still kinder to the material.

The soft inner fleece of our covers rests on the tank, side cases and painted surfaces and prevents micro-scratches when putting it on and taking it off. On the outside, the 300D material keeps off dust and tyre abrasion, so your Calibro Bagger stays scratch-free even after many days parked up.

The elastic hem pulls the cover together underneath the bike so it sits snugly against the frame. That way, even in a draft, the fabric stays where it belongs.

The securing straps are firmly sewn into our cover and are fastened underneath the Alltrhike. That way, the cover stays where it belongs even in strong gusts. If you want it even tighter on the bike, thread an ABUS disc lock through the reinforced lock openings and secure it to the frame.

For a carport, courtyard and any outdoor parking spot, the Premium Outdoor cover is the right choice. It’s waterproof, and the ventilation openings at the mirrors also let air circulate under the cover. If your bike spends the whole winter in a dry garage, the Indoor cover is enough, designed for dust and light contact.

The cover completely conceals the paintwork, seat and any fitted accessories, so from the outside you can’t tell which model is underneath. You can also secure it to the frame via the reinforced lock openings. Our motorcycle lock advisor shows you which lock fits.

Rinse off coarse dirt with clean water and a soft sponge, then it’s best to let the cover air-dry while hanging. Aggressive cleaners and the washing machine attack the coating and weaken the lotus effect. Get the step-by-step guide to gentle washing for your bike.

Constant sunlight fades paint and plastic parts, but the UV-resistant outer material keeps that radiation away from the Rumble 350. At the same time, the lotus-effect coating prevents bird droppings and tree sap from baking into the paint and protects bolts from corrosion.

Yes—if you cover the bike while it’s wet and then leave the cover on for days. So cover it as dry as possible. The ventilation openings at the mirrors let the air circulate underneath, so residual moisture can escape to the outside.

The size recommendation is tailored to the length and height of the 3 ½ Sport, so the fabric sits close instead of hanging in folds. At the bottom, the cover draws in, so the wind can’t get underneath.