Premium scooter covers for your Piaggio from MYCOVER®
Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit
The MYCOVER® scooter cover makes no compromises when it comes to protecting your scooter. An exclusive cover sewn by hand and equipped with 10x sophisticated functions.
Easy selection of the right size thanks to recommendations for over 2500 scooter models and over 25 intermediate sizes for all scooters and motorcycles.
MYCOVER® – Protection at its finest: 360° all-round protection for your scooter!
Interactive size recommendation
3 steps to the right size of covers for your Piaggio scooter
Choose your scooter from over 1,300 models and get the right size recommendation for the premium outdoor scooter covers from MYCOVER® in 3 simple steps.
In addition to factory condition, we also cover conversions for some vehicles with our interactive size recommendations. Rarely is it so easy to buy the right covers!
MYCOVER® – Protection at its finest
If your model year is not on the list, select the motorcycle model of the same type. If the size does not fit, we will of course take the product back or exchange it.
Fill in the fields above to receive recommendations
Instructions: Measure your motorcycle correctly and find the right size of covers
If your bike is converted or you couldn’t find it in our size recommendations, then use our step-by-step guide to find the right size Motorcycle covers by measuring your bike.
Info: Accessories such as tank bags, exhaust systems, footrest extensions, booster seats, crash bars, crash pads, axle protectors and similar conversions fit under the covers and do not usually have to be measured separately. Unless they exceed one of the maximum values to be measured.
The official specifications of the manufacturers are always without license plate holder, mirrors and without windshield.
Better measure yourself to be on the safe side!
Here’s how you do it:
Step 1: Position the motorcycle correctly
- Place your motorcycle on the side stand and not on the main stand so that the rear height can be measured correctly.
- Straighten the handlebars. If necessary, use a wedge or hammer on the tire to hold it in place
The whole thing should then look something like this:
Step 2: Measure motorcycle correctly
Now measure and write down the following dimensions of your vehicle:
- Maximum length
- Maximum front width (handlebar or mirror)
- Maximum front height (mirror or pane)
- Rear height (incl. sissy bar, topca carrier etc.)
- Rear width (please also measure the side license plate holder and side cases)
Rear height including top case: Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
When measuring the height values, make sure that the folding rule and the vehicle are positioned perpendicular to the ground. A little tip: If you sit on the vehicle or hold it straight, especially with choppers, you can measure more easily.
Use the charts below to guide your measurement. Hold your folding rule at the same angle as the marks positioned on the diagrams.
Total length
Tail height
Maximum front height
Maximum front width
Maximum rear width
Then use the following tables to find the right size.
Step 3: Compare your measurements with the dimensions of the MYCOVER® Motorcycle covers
Tip: The dimensions given in the tables are the maximum dimensions of our products.
Understanding table values correctly:
- Length/front width: Your vehicle measurements must be smaller than the values given in the table. This ensures that a vehicle fits under the tarpaulin.
- Height front/height rear: Your vehicle measurements should be approximately equal to or greater than the values given in the table. To prevent the tarpaulin from resting on the floor, the elastic band does the rest for you.
A little tip on ground clearance:
If you calculate the difference between the vehicle height and the height of the covers, you can roughly estimate how much ground clearance the tarpaulin will have. A ground clearance of 5 to 7 cm is often suitable so that the tarpaulin extends approximately to the edge of the wheel rim.
If you can live with it visually, there’s nothing technically wrong with more ground clearance. If in doubt, opt for more ground clearance than a surface-mounted covers. However, the brake disk should not be visible.
Sizes for scooters and choppers (choppers below)
Note on top case sizes (+ TC):
+ TC are our top case sizes. Only buy for vehicles with top case fitted. Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
Size | Length | Front width | Front height | Height tail |
---|---|---|---|---|
XS | 190 | 85 | 115 | 75 |
S | 205 | 90 | 120 | 85 |
M | 215 | 95 | 120 | 100 |
M+ | 215 | 95 | 130 | 90 |
M+ TC | 215 | 95 | 130 | 115 |
L | 235 | 100 | 120 | 100 |
L+ | 235 | 100 | 130 | 90 |
L+ TC | 235 | 100 | 130 | 125 |
L++ | 235 | 100 | 145 | 95 |
L++ TC | 235 | 100 | 145 | 130 |
L+++ | 235 | 100 | 160 | 95 |
XL | 245 | 110 | 135 | 100 |
XL+ | 245 | 110 | 145 | 100 |
XL+ TC | 250 | 115 | 145 | 140 |
XL+ GT | 255 | 110 | 145 | 100 |
XL+ GT +TC | 255 | 115 | 145 | 100 |
XL++ | 245 | 110 | 160 | 100 |
XXL | 260 | 115 | 150 | 90 |
Sizes for choppers
Size | Length | Front width | Front height | Height tail |
---|---|---|---|---|
C-L | 245 | 110 | 110 | 65 |
C-L+ | 255 | 110 | 125 | 65 |
C-L++ | 255 | 110 | 140 | 65 |
C-L+++ | 255 | 110 | 155 | 65 |
C-XL | 260 | 110 | 115 | 65 |
C-XL+ | 260 | 110 | 130 | 65 |
C-XL++ | 270 | 100 | 145 | 70 |
C-XXL-C | 270 | 110 | 150 | 85 |
Unsure which size fits your bike? We are happy to help you and here you can reach us: Contact.
The premium outdoor scooter tarpaulin also for Piaggio scooters
Suitable for your Piaggio: The MYCOVER® scooter cover
With the MYCOVER® scooter cover, your Piaggio is protected from moisture, dirt and UV radiation all year round. Also perfect as additional indoor or outdoor protection for your carport and garage against dirt, dust and unwanted scratches.
Exclusive scooter covers for your Piaggio
The scooter cover for value retention & theft protection, also suitable for your Piaggio model
Our stylish scooter covers from MYCOVER® Protection also provide optimum protection for exclusive Piaggio scooters and preserve their special paintwork and components in the best possible way.
Our scooter covers are subject to the strictest internal criteria and protect the Piaggio Medley (S) i-get ABS or the Liberty 125/S ABS in size M, for example.
MYCOVER® scooter covers
A high-quality scooter deserves a high-quality scooter cover
When you ride a Piaggio, you feel the Italian passion for design and quality.
For optimum value retention, we have developed the indoor and outdoor scooter tarpaulin for 360° protection. The MYCOVER Premium Outdoor scooter covers also offer your Piaggio optimum protection against moisture, dirt and scratches.
Thought out in detail and equipped with 10 important functions to protect your Piaggio. The MYCOVER® scooter cover for the whole year!
Protect your scooter with the high-quality scooter cover for Piaggio . Our scooter cover for Piaggio offers optimum protection from the weather, dust and dirt. The breathable, water-repellent scooter tarpaulin for Piaggio adapts perfectly to your vehicle thanks to an elastic hem. Ideal for any storage, the scooter tarpaulin also extends the service life for Piaggio. Discover the ideal scooter cover for your Piaggio scooter now. The scooter covers for Piaggio effectively protect the bike from environmental influences.
History
About Piaggio
Innovation is our way, Piaggio has stood for this since the beginning of the 20th century. Starting with airplanes, they developed their first official scooter in 1945, the iconic Vespa 98. Piaggio was and is a pioneer when it comes to electromobility, developing a scooter with an electric motor as early as 1973, which went into production two years later. They also produced the world’s most successful three-wheeled scooter and today stand for new ideas, innovation and technology.