Premium Motorcycle covers for your Bimota from MYCOVER®
Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit
The MYCOVER® Motorcycle Cover makes no compromises when it comes to protecting your motorcycle. An exclusive cover sewn by hand and equipped with 10x sophisticated functions.
Easy selection of the right size thanks to recommendations for over 2,500 motorcycle models and over 25 intermediate sizes for all motorcycles and scooters.
MYCOVER® – Protection at its finest: 360° all-round protection for your motorcycle!
Interactive size recommendation
3 steps to the right size of covers for your Bimota motorcycle
Choose your motorcycle from over 1,300 models and get the right size recommendation for the premium outdoor Motorcycle covers from MYCOVER® in 3 simple steps.
In addition to factory condition, we also cover conversions for some vehicles with our interactive size recommendations. Rarely is it so easy to buy the right covers!
MYCOVER® – Protection at its finest
If your model year is not on the list, select the motorcycle model of the same type. If the size does not fit, we will of course take the product back or exchange it.
Fill in the fields above to receive recommendations
Instructions: Measure your motorcycle correctly and find the right size of covers
If your bike is converted or you couldn’t find it in our size recommendations, then use our step-by-step guide to find the right size Motorcycle covers by measuring your bike.
Info: Accessories such as tank bags, exhaust systems, footrest extensions, booster seats, crash bars, crash pads, axle protectors and similar conversions fit under the covers and do not usually have to be measured separately. Unless they exceed one of the maximum values to be measured.
The official specifications of the manufacturers are always without license plate holder, mirrors and without windshield.
Better measure yourself to be on the safe side!
Here’s how you do it:
Step 1: Position the motorcycle correctly
- Place your motorcycle on the side stand and not on the main stand so that the rear height can be measured correctly.
- Straighten the handlebars. If necessary, use a wedge or hammer on the tire to hold it in place
The whole thing should then look something like this:
Step 2: Measure motorcycle correctly
Now measure and write down the following dimensions of your vehicle:
- Maximum length
- Maximum front width (handlebar or mirror)
- Maximum front height (mirror or pane)
- Rear height (incl. sissy bar, topca carrier etc.)
- Rear width (please also measure the side license plate holder and side cases)
Rear height including top case: Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
When measuring the height values, make sure that the folding rule and the vehicle are positioned perpendicular to the ground. A little tip: If you sit on the vehicle or hold it straight, especially with choppers, you can measure more easily.
Use the charts below to guide your measurement. Hold your folding rule at the same angle as the marks positioned on the diagrams.
Total length
Tail height
Maximum front height
Maximum front width
Maximum rear width
Then use the following tables to find the right size.
Step 3: Compare your measurements with the dimensions of the MYCOVER® Motorcycle covers
Tip: The dimensions given in the tables are the maximum dimensions of our products.
Understanding table values correctly:
- Length/front width: Your vehicle measurements must be smaller than the values given in the table. This ensures that a vehicle fits under the tarpaulin.
- Height front/height rear: Your vehicle measurements should be approximately equal to or greater than the values given in the table. To prevent the tarpaulin from resting on the floor, the elastic band does the rest for you.
A little tip on ground clearance:
If you calculate the difference between the vehicle height and the height of the covers, you can roughly estimate how much ground clearance the tarpaulin will have. A ground clearance of 5 to 7 cm is often suitable so that the tarpaulin extends approximately to the edge of the wheel rim.
If you can live with it visually, there’s nothing technically wrong with more ground clearance. If in doubt, opt for more ground clearance than a surface-mounted covers. However, the brake disk should not be visible.
Sizes for scooters and choppers (choppers below)
Note on top case sizes (+ TC):
+ TC are our top case sizes. Only buy for vehicles with top case fitted. Please measure the rear height with the top case fitted if you park with it permanently or store your vehicle with it over the winter.
| Size | Length | Front width | Front height | Height tail |
|---|---|---|---|---|
| XS | 190 | 85 | 115 | 75 |
| S | 205 | 90 | 120 | 85 |
| M | 215 | 95 | 120 | 100 |
| M+ | 215 | 95 | 130 | 90 |
| M+ TC | 215 | 95 | 130 | 115 |
| L | 235 | 100 | 120 | 100 |
| L+ | 235 | 100 | 130 | 90 |
| L+ TC | 235 | 100 | 130 | 125 |
| L++ | 235 | 100 | 145 | 95 |
| L++ TC | 235 | 100 | 145 | 130 |
| L+++ | 235 | 100 | 160 | 95 |
| XL | 245 | 110 | 135 | 100 |
| XL+ | 245 | 110 | 145 | 100 |
| XL+ TC | 250 | 115 | 145 | 140 |
| XL+ GT | 255 | 110 | 145 | 100 |
| XL+ GT +TC | 255 | 115 | 145 | 100 |
| XL++ | 245 | 110 | 160 | 100 |
| XXL | 260 | 115 | 150 | 90 |
Sizes for choppers
| Size | Length | Front width | Front height | Height tail |
|---|---|---|---|---|
| C-L | 245 | 110 | 110 | 65 |
| C-L+ | 255 | 110 | 125 | 65 |
| C-L++ | 255 | 110 | 140 | 65 |
| C-L+++ | 255 | 110 | 155 | 65 |
| C-XL | 260 | 110 | 115 | 65 |
| C-XL+ | 260 | 110 | 130 | 65 |
| C-XL++ | 270 | 100 | 145 | 70 |
| C-XXL-C | 270 | 110 | 150 | 85 |
Unsure which size fits your bike? We are happy to help you and here you can reach us: Contact.
The premium outdoor Motorcycle cover also for Bimota motorcycles
Suitable for your Bimota: The MYCOVER® Motorcycle cover
The MYCOVER® motorcycle cover protects your Bimota from moisture, dirt and UV radiation all year round. Also perfect as additional indoor or outdoor protection for your carport and garage against dirt, dust and unwanted scratches. A high-quality Motorcycle cover serves as a Motorcycle cover to protect the motorcycle from the weather and can also be used as motorcycle weather protection. In heavy rain, the Motorcycle cover provides optimum protection for the motorcycle, as the Motorcycle covers are absolutely waterproof.
V2 engine – V4 engine – Small and light motorcycles – Scooters
Select model and receive size recommendation
Choose your model and get one step closer to your premium covers from MYCOVER®
KB4 (from 2022)
Tesi H2
Exclusive Motorcycle covers for your Bimota
The Motorcycle cover for value retention & theft protection, also suitable for your Bimota model
Our stylish Motorcycle covers from MYCOVER® Protection also provide optimum protection for exclusive Bimota motorcycles and preserve their special paintwork and components in the best possible way.
Our motorcycle covers are subject to the strictest internal criteria and protect the Bimota KB4 (2022) in size M, for example.
MYCOVER® Motorcycle covers
A high-quality motorcycle deserves a high-quality Motorcycle covers.
When you ride a Bimota, you can feel the Italian passion for design and quality.
For optimum value retention, we have developed the indoor and outdoor Motorcycle cover for 360° protection. The MYCOVER Premium Outdoor Motorcycle covers also offer your Bimota optimum protection against moisture, dirt and scratches.
Well thought-out down to the last detail and equipped with 10 important functions to protect your Bimota. The MYCOVER® Motorcycle cover for the whole year!
The motorcycle cover offers excellent outdoor motorcycle protection and also acts as a durable Motorcycle covers.
Motorcycle covers keep your motorcycle dry even in heavy rain, as these motorcycle covers are extremely durable.
History
About Bimota
Since 1973, Bimota has stood for exclusive Italian vehicles, limited editions, Italian design, unique engineering and maximum manufacturing quality in the motorcycle world. They embody all of this in their motorcycles with engines and other components from Kawasaki, which has owned almost half of Bimota’s shares since 2019, helping the company to gain new prominence. They specialize in the conversion of Japanese and Italian motorcycles, which can be seen in their model names.