Recommendations for 100 manufacturers & 2500 models
MYCOVER® Covers size finder
– Find your size in 3 steps –
If your model year is not on the list, select the model of the same type. If the size does not fit, we will of course take the product back or exchange it.
Fill in the fields above to receive recommendations
The second skin for your motorcycle
MYCOVER® Premium Motorcycle covers
Exclusive outdoor quality • Handmade • Tear resistant • Waterproof • Can be used all year round • Perfect fit
Easy and fast size selection
- Size recommendations for more than 2500 models
- Over 30 intermediate sizes for all motorcycle types
Premium quality without compromise
Like thousands of other bikers, rely on MYCOVER®
14/06/2020
“A very robust and tear-resistant material: after more than 2 years of continuous use, no cracks, UV damage, or the like. Definitely no comparison to my previous Covers!”
03/08/2021
“Finally a waterproof Motorcycle cover that really protects. Even after several heavy rains no problems. Absolutely Top!”
Why MYCOVER®?
Developed by bikers for bikers
Fed up with constantly torn Motorcycle covers, we decided in 2018 to develop THE premium cover for our own motorcycles.
Today, together with our biker community, we develop custom-fit outdoor Motorcycle covers for all makes and models.
Our partners
Problems of our biker community
Typical problems with Motorcycle “Covers”
Material breakage after a short time – Can cause damage & loss of value to the motorcycle
Material breakage due to frost and UV damage. Seams tear due to poor workmanship and inferior material.
Poor fit, lies on the damp ground and flutters strongly in the wind. Attention: Danger of overturning!
Defective electronics, including safety-relevant components. In addition, rust and mold due to standing moisture.
Simple rain tarp, neither fit nor breathable. Definitely not suitable for outdoor use!
For your motorcycle no compromise!
Choose exclusive motorcycle protection
Our motorcycles deserve real long-term outdoor protection! That is why we have combined special outdoor material with our best features:
- Exclusive outdoor material
Waterproof and breathable for maximum value retention - Strong all-weather protection
UV-resistant and weatherproof with double nano-coating
- 100% durable
Scratch- & tear-resistant 300D material with extra reinforced double seams - Handmade & sewn
By experienced employees for long-term value retention
- Optimum fit
No flapping thanks to perfectly fitting sizes with elasticated hem - Protects the paintwork permanently
Special scratch protection with extra soft inner fleece
- Additional heat protection material
Reduces the risk of heat damage (up to approx. 200°C) - Protects your exhaust
In the lower area of the manifold up to the exhaust
- Double ventilation zone
At the height of the exterior mirrors to allow moisture to escape effectively - Optimum air circulation
Prevents waterlogging and helps to prevent rust
- Bright reflectors
Discreetly finished in the seams in a striking design - 360° visibility at night
For optimum reflection from all sides
- Reinforced lock openings
No rubbing plastic or aluminum rings to protect your rims and paintwork - Anti-theft protection on both sides
Attach the lock to the front or rear wheel depending on the parking situation
- 2x sturdy safety straps
Securely fasten the covers to the motorcycle - Protects sensitive components
By minimizing susceptibility to wind and friction on the paint
- License plate window
Approved according to § 10 ABs. 2 GZV and § 23 para. 1 StVO - For every parking space
Suitable and no more towing or parking tickets
Experience the MYCOVER® quality
Probably the last Covers you will buy!
Optimal fit for your motorcycle
New: Intermediate sizes for all motorcycle types
Tourer – Chopper – Supersport – Naked – Enduro – Scooter
Tourer: BMW R 1200 RT
Chopper: Harley Davidson Super Glide
Super sports car: BMW S1000RR
Naked: Yamaha XSR700
Enduro: Ducati Hypermotard
Scooter: Vespa GTS 125
Decide now for MYCOVER®
Your motorcycle deserves more than a cheap cover!
Additional information
Frequently asked questions about the MYCOVER® Outdoor Motorcycle covers
Which Motorcycle covers size is the right one for my motorcycle?
My motorcycle is not rebuilt:
We have measured for you and you will find the right size recommendation for over 2,000 different motorcycle models in our size chart.
We have size recommendations for:
- Standard (factory / original condition)
- Topcase
- Side case
- Side Case & Top Case
- Short license plate holder
- Short mirrors
- Short license plate holder and short mirrors
- High front window
If your bike is not in the list or you have questions about the right size selection: With our personal customer support from bikers for bikers we are happy to help you!
My motorcycle is rebuilt:
If you have modified the original condition of your motorcycle, you may need a different size of Motorcycle covers than specified in the size recommendation, depending on the type of conversion.
Feel free to use the size recommendation in the table as a reference and then see what dimensions have changed with your conversions.
How to measure your motorcycle correctly in three simple steps, we show you here: Measuring a motorcycle correctly
For questions about measuring or general questions, feel free to contact us by email, What’s App, or phone.
Why does the MYCOVER Premium Outdoor Motorcycle covers cost more than other covers?
To answer the question in a nutshell:
Because other Motorcycle covers often only offer you basic rain protection with many compromises and disadvantages!
Our own experiences with other Motorcycle covers:
Due to our living situation, our first motorcycles had to be parked outside all year round, which is why we wanted to protect them with a cover to preserve their value: In just 3 years, we have worn out – unbelievably – 9 different Motorcycle covers.
As we unfortunately found out ourselves, the Covers on the aftermarket often only offer basic rain protection for a limited time and (probably for cost reasons) many of the necessary functions have been skimped on. We not only bought Covers from well-known brand manufacturers, but also the so-called “test winners” and “bestsellers”:
The result was simply disappointing for us after just a few weeks!
After only a short use, the seams often came loose, the fabric tore, mold on the inside, metal rings caused scratches in the paint and because of the poor fit, the first rust appeared due to standing moisture … One thing we can tell you: This issue has cost us not only unnecessary money, but also a lot of time and nerves!
After talking to biker friends about our experiences, we then quickly realized that we were not alone with this problem.
This is definitely not how we had imagined it for our motorcycles and this is where we had to act!
After almost two years of development, we had developed an uncompromising outdoor cover for our motorcycles: We explicitly opted for outdoor fabrics that have been tested over many years and are extremely hard-wearing, which are also finished with a double nano-coating.
Carefully sewn by hand to create the unique and striking design of the motorcycle cover. MYCOVER® Motorcycle covers. One of the design highlights are the reflective stripes that are elaborately incorporated into the seam and run around both sides, which provide reliable 360° visibility protection, not only at night.
With the MYCOVER® Outdoor Covers you don’t get basic rain protection, but an exclusive Motorcycle cover with over 10x functions, which are the basic prerequisite for optimum value retention and theft protection.
Special bikes deserve special protection!
MYCOVER® – Protection at its finest
New equipment for Chopper sizes (C-…)
We have taken your feedback into account when developing the Chopper sizes!
Exclusively soft inner flow and no heat protection material:
In order to protect your sometimes very sensitive special paintwork and e.g. powder-coated exhaust systems even better from scratches, we have dispensed with the internal heat protection in the lower area of our Chopper Outdoor Covers and equipped the Chopper Outdoor Covers exclusively with our soft, paint-protecting inner fleece.
Extra pockets (4x) on the inside for the safety straps:
To protect your special paintwork even better when putting on the Covers, you can now securely stow the safety straps in specially designed pockets on the inside of the Covers and close them with Velcro. More protection for your paint really does not go! After putting them on, you can then let the safety straps fall out of the protective pockets by simply releasing the Velcro and additionally fix the Covers if necessary.
Extra openings (2x) for your battery charging cable:
Due to the use of alarm systems, the battery of Chopper motorcycles must be charged frequently. For this purpose, we have made 30cm long and reclosable openings for your battery charging cable on the right and left side, each at the height of the battery. Charging your battery with the MYCOVER Covers has never been so easy!
Why does a Motorcycle cover need a license plate window?
According to § 10 ABs. 2 GZV and §23 par. 1 StVO, a viewing window for Motorcycle covers is mandatory and a warning can be issued in the event of non-compliance. Better buy a Motorcycle covers with a window for the license plate and save the money of a warning for a tour with your friends!
Does an outdoor Motorcycle cover protect against theft?
More than 20,000 two-wheelers are stolen in Germany every year…
The MYCOVER® Motorcycle covers not only protect you from prying eyes, but are also equipped with two security openings at the front and rear wheel for the use of your motorcycle lock. Combine your new MYCOVER® Motorcycle covers with a high-quality ABUS lock, for example, this combination offers you excellent theft protection and guarantees quieter nights.
Does the Motorcycle covers protect against scratches?
The soft inner lining of the MYCOVER® Covers minimizes scratching and contributes to the best possible value retention of your motorcycle.
Our recommendation: Before you use a Motorcycle cover, your motorcycle must be clean (no sand, oil or other dirt, etc.).
The friction generated when pulling on the Motorcycle cover or the movement caused by the wind can result in unintentional damage to the paintwork, plastic parts, mirrors, rims, etc. or damage to the cover if the motorcycle is dirty. Therefore, clean your motorcycle regularly and look forward to a long shining paint and an optimal value retention.
What is the best way to put the Motorcycle covers on the motorcycle?
Step 1: Raise front
- Align the fully unfolded Motorcycle covers with the vehicle.
- Starting with the front, put the Motorcycle covers over the mirrors and handlebar ends over the front fairing.
- Pull the Motorcycle covers apart using the handle on the lower hem (to the left and right of the reflector strip) and pull it completely down over the front wheel.
Step 2: Place the Motorcycle covers over the seat
- Spread the rest of the Motorcycle covers over the vehicle (place over the seat).
- Go to the rear of the vehicle.
Step 3: Cover up to the tail
- Pull the Motorcycle covers apart using the handle on the lower hem (to the left and right of the reflector strip).
- Put the tarpaulin completely over the license plate and the rear tire.
What prevents the outdoor Motorcycle cover from being blown away by the wind?
Thanks to the two safety belts of the MYCOVER® Motorcycle covers (in front of the rear wheel and behind the front wheel), the fabric adapts perfectly to the shape of your motorcycle.
A good fit not only looks visually much better and prevents the annoying fluttering in the wind, but also ensures a minimization of wind susceptibility (danger of tipping over by wind), as well as less friction on your motorcycle.
Only a properly fitting Motorcycle cover can protect your motorcycle in the long term!
How do I care for the Motorcycle covers properly?
Important to avoid damaging the double nano-coating of the Motorcycle covers: No cleaning agents or similar may be used for cleaning.
We recommend wiping the Motorcycle covers with lukewarm water only.
- The Outdoor Motorcycle Cover must not be left on the ground to dry.
- We recommend using two outdoor chairs or a long clothesline.
- Improper drying, e.g. using clothespins (sharp edges), a dryer or similar, can damage the Motorcycle covers. Be careful when cleaning the license plate viewing window (prone to scratching).
How do I get the outdoor Motorcycle covers back into the transport bag properly?
The scope of delivery of the Motorcycle covers includes a transport bag.
Before the Motorcycle cover can be stored or transported, it must be completely dry and clean.
Dirt and moisture can lead to the formation of mold or damage to the Covers or packaging. The Covers must not be folded or creased at the license plate window or the ventilation ears, as irreversible damage may be caused.
Our recommendation: When folding the cover for the transport bag, you should start with the license plate window so that it is not creased in the transport bag:
What should I look out for when comparing outdoor Motorcycle covers?
- To protect against rust, an outdoor Covers should not only be waterproof, but also breathable.
- Make sure you have adequate UV protection to keep the plastics, rubber components and paint from fading.
- For protection in winter and summer, the material must be cold and heat stable.
- To protect the paint from bumps and scratches, look for a durable material with an adequately lined, cotton-like inner fleece.
- According to § 10 ABs. 2 GZV and §23 par. 1 StVO, a license plate window / viewing window is mandatory and is subject to warning in the event of non-compliance. Better save the money for a tour with your friends!
- Make sure that the Motorcycle cover is dirt-repellent. For example, through a coating. This additionally protects the value retention and facilitates cleaning.
- Even with a Motorcycle covers your motorcycle must be clearly visible to other road users. Reflectors or reflective fabrics significantly improve visibility at night!
- Ensure a good fit, e.g. with an elastic hem, to minimize susceptibility to wind and friction between the cover and the Motorcycle cover.
- Look at additional fuses against wind. For example, by means of safety belts or other holders.
- A properly positioned heat shield material can not only protect against a warm exhaust or engine, but also significantly reduce moisture absorption from the ground.
We recommend using a Covers not only for outdoor use. Also in the garage, underground garage or carport, this reliably protects against dust, dirt, scratches and bumps.
Don’t save at the wrong end!
I want to protect my motorcycle in the best possible way with a Motorcycle covers. What should I pay attention to?
We have been dealing for several years (professionally and privately) with the value preservation and theft protection of our motorcycles.
We firmly believe that a high-quality Motorcycle covers can reliably protect your motorcycle in any parking situation. We have compiled all our knowledge for you in our Motorcycle cover advisor.
You can find more information in the instructions for use and safety instructions (PDF) for our outdoor Motorcycle covers.
Personal advice from bikers for bikers
Before you contact us, please check if there is already a current recommendation for your bike: > Here to the size recommendation <
We are available for you by WhatsApp (by chat) and by email. Please do not double request, we will reply within 48 hours:
A
Andreas42
Ducati Panigale V4
The search has finally come to an end, clear 5/5 stars
Verified owner
Size: M
Before that, I had already worn out three covers. The last one hadn’t even lasted 3 months before the seams came undone…. From the outdoor we have already bought the second, first for my sports bike and now for my brother’s touring bike. If you want premium, you will not get past Mycover, absolutely top!
M
Marcel1R
Super guys !!!!!
Verified owner
This is not China garbage.
B
Biker-f3560b
Really recommendable!
Verified owner
Size: XL+
Meanwhile, we have in the “motorcycle enthusiast family” 4 pieces of covers from you.
G
Gonzol
BMW 1250 GS
Quality
Verified owner
Size: XL+
Have a BMW 1250 GS and for this vehicle bought a XL+ hood from Mycover.
Today after 2 years I can say that the quality, durability and robustness as described by Mycover is true.
I unfortunately have no garage and my bike is always on the same forecourt at the house in the blazing sun, (plastic parts on the GS).
already bleached out slightly because of the blazing sun.
My hood should be at least UV-resistant, breathable, robust, so all wishes fulfilled.
My motorcycle had survived the whole winter and summer without moisture and UV damage, so, I can confirm for myself that this is
is an excellent product that I had wanted for a very long time.
Previously I had bought ( 5 different) protective covers, including one from BMW, but all did not fulfill my purposes or only to a limited extent.
Thank you, Mycover!
A
Alexander
BMW S1000XR, 2015
BMW S1000XR 2015 - Fits like a second skin 1A++ of quality
Size: XL+
I have had many tarpaulins, very expensive and very cheap. The only difference so far what the price, but the quality felt always the same garbage bag. I heard about MyCover from a buddy who lives in HH (I’m PI myself *sorry*) 🙂
The XL+ tarp fits my BMW S1000XR like a glove. The fabric and stitching are of the finest quality. Even in strong winds (today is storm in HH and PI 29.01.2022), the tarp remains very stable on the machine and does not flutter a bit (I’m looking out the window right now). Heavy rain can the tarp off without any problems and the moped remains absolutely dry. The typical problem with condensation has not reoccurred with me so far. Now if the UV resistance is also as good as the rest, this is the best tarp you can buy. I definitely recommend your product. Ps. The bag is really awesome !
M
Max
BMW F850GS, 2021
Top quality, premium cover and price / performance 1A
Verified owner
Size: XL+
The cover from MyCover in size XL+ is made for my BMW F850 GS. After many “cheap” covers, which lasted at most 1 year and never promised what the manufacturer stated, I came to MyCover. Price / performance is TOP here, the quality of the hood is perfect and it keeps what it promises. Wind and weather cannot harm it, the motorcycle stays dry and it is optimally protected against any environmental influences. In addition, the lacquer is optimally protected by soft inner material against scratches and holograms during application/removal. At night, if the motorcycle is not on your own property, it is perfectly illuminated by the attached reflectors, so you can not miss them. Shipping was super fast and the hood came neatly delivered. I am really very excited and glad that my bike is now so well protected outside. I can only recommend it to every motorcycle lover to get such a hood!
B
Bmw-Biker
Bmw GS 1200 LC, 2013
Big PlanCinema
Verified owner
Size: XL+ GT +TC
Tarpaulin arrived quickly. Even the packaging bag is high quality. Tarpaulin fits fantastically. Also excellent to the touch. Thanks to MYCOVER®. Never seen a tarpaulin of this quality before. Keep up the good work.
V
Vespa-Biker
Vespa GTS Super sport, 2025
Cover for Vespa
Verified owner
Size: M+
Material quality makes a very good impression.
The fit is really good.
Makes a very high-quality impression!
D
Det
BMW R18 FE, 2020
Very good quality
Size: C-XL+
Yes, at the moment everything fits perfectly, somehow tailor-made. Let’s see what it looks like in 2 weeks after the bobber conversion. But the price is totally ok for this quality.
Mfg