FAQ
Product questions Motorcycle “Outdoor Cover”
How do I find the right size/fit?
We have a size chart with recommendations for 100 manufacturers & 2500 models in our shop. Various modifications are also taken into account there in order to recommend the best possible fit for you.
How do I measure correctly?
How should I measure?
Usually no measuring is necessary. However, if your vehicle is not in our size chart, you can simply follow our measuring instructions.
What does “distance to the ground” mean and how should I calculate it?
Simply follow the measuring instructions in the picture. The distance to the ground is already taken into account so that the cover does not rest on the ground.
Should my motorcycle stand on the main stand when measuring?
No, this can lead to incorrect height values. Therefore, always measure the motorcycle in the normal standing position on the wheels.
Fit
Why is the front wheel no longer covered when the handlebars are turned?
This is due to the design of the cover and the extreme steering radii of some Chopper models.
We are constantly working on a better fit, but despite our more than 20 available sizes, we cannot cover every shape 100%.
We also have to take into account that motorcycles are parked differently – with the handlebars turned to the left, right or straight.
My cover does not go over the rim edge. What is the reason for that?
This is due to the design of the cover and the extreme steering radii of some models.
We are constantly working on a better fit, but despite our more than 20 available sizes, we cannot cover every shape 100%.
We also have to take into account that motorcycles are parked differently – with the handlebars turned to the left, right or straight.
Why does the viewing window not match my license plate?
This is due to the design of the cover and the numerous modifications and different license plate positions of the many motorcycle models.
We are constantly working on a better fit, but despite our more than 20 available sizes, we cannot cover every shape 100%.
What do I have to do if my motorcycle is exactly at the maximum of the specified dimensions?
Please take another look at our size chart to see if there is already a size recommendation for your model.
Since our cover measurements always indicate the maximum values of the cover, we recommend that you contact us directly in this case. We will be happy to help you find the right size.
I am between two sizes. Which one should I order?
Please take another look at our size chart to see if there is already a size recommendation for your model.
Since our cover measurements always indicate the maximum values of the cover, we recommend that you contact us directly in this case. We will be happy to help you find the optimal size for your motorcycle.
My motorcycle has an attachment that is not listed in the size chart. What should I do?
Please check our size chart again to see if there is already a size recommendation for your model or the equivalent facelift model.
If you cannot find a suitable recommendation there, please contact us. We will then check the design and help you determine the correct size.
Why do you recommend the same size for two different motorcycle designs?
Because the designs differ only minimally in length and height, a single size can cover both models.
I have large side cases. Will the cover still fit?
Please take a look at our size chart – we probably already have a suitable recommendation for your bike.
Normal side cases usually fit easily under the recommended size. If you have particularly large cases, you are welcome to contact us and we will help you with the selection.
I have a motorcycle with a sidecar. Which cover fits?
Please check our size recommendations to see if we already have a suitable size for your model.
If no recommendation is available, you can send us a personal request directly via the recommendation module.
Do you know other bikers who are also interested in a cover for motorcycles with sidecars? Then let us know! The more inquiries we receive, the higher the chance that this product will go into series production.
I have a top case. Which cover do I need?
Our covers for motorcycles with top cases always have the suffix “+TC”.
Please check our size chart to see if there is already a recommendation for your model. If you are unsure, you are welcome to contact us.
I have a side-mounted license plate holder, a touring windshield, etc. Will the cover still fit?
A side-mounted license plate holder usually also fits on the Chopper models.
Please check our size chart to see if there is already a size recommendation for your model or an equivalent facelift model. If there is no suitable recommendation, please contact us. We will then check the design and help you find the right size.
How big can the top case be for size “M+TC”?
All common standard top cases on the market fit under the “+TC” sizes.
If you have a particularly large top case, you are welcome to contact us and we will check whether the cover fits.
I have a footrest extension. Will the cover still fit?
As a rule, a footrest extension has no influence on the fit.
Exception: If you have a Chopper model with additional footrests on the crash bar, you should inform us individually. We will then check the dimensions and find the best solution for you.
I have crash bars or crash bars with footrests. Will the cover still fit?
Crash bars or those with footrests usually have no influence on the fit of the cover.
However, if you have a Chopper model with additional footrests on the crash bar, you should inform us individually. We will then check the dimensions and find the best solution for you.
Steering lock active – I cannot turn the handlebars and the cover is pulled upwards. What to do?
This problem usually occurs when the motorcycle cover is too short or the clips on the front wheel have been tightened too tightly.
If your motorcycle is already at the size limit of the recommended cover or this has been exceeded, this effect can also occur.
Loosen the clip on the front wheel and check whether the problem persists.
Why is the cover not asymmetrical?
An asymmetrical design can lead to many problems. Since bikers park their motorcycles differently – with the handlebars turned to the left, right or straight – an asymmetrical cover would be impractical or unsuitable depending on the parking situation.
Do you offer custom-made or one-off products?
We are currently unable to offer special or custom-made products.
However, if it is a design that we have not yet taken into account and for which there is high demand, you can register your model with us via the size chart. This allows us to check whether an expansion of our range is possible.
Can I get a cost estimate?
No, we do not provide cost estimates.
However, if you place a pre-order, you will of course receive your invoice.
I have a custom motorcycle, a café racer or a model with a wide boxer engine. Which cover fits there?
Please check our size chart to see if there is already a recommendation for your bike.
If your model is not listed there, you can enter it directly using the report function in the size chart on our website. This allows us to check whether a suitable size is available or to expand our range accordingly with your help.
Water & moisture
Why does water form on my cover?
With some motorcycles, so-called ponding cannot be completely avoided due to the design. Since the seat height is usually lower than the front and rear height, the cover can sag over time.
This problem occurs particularly with topcase sizes. So check whether you can pull the cover in such a way that drainage edges are formed to specifically drain the water.
Why does moisture form under the cover?
Moisture under the cover is completely normal and can occur to varying degrees depending on the parking situation.
This is often evident on the license plate window or through damp spots on the seat or tank. Since moist air rises from the ground, it collects under the cover.
A similar effect occurs in the car when condensation forms on the inside of the windshield. That’s exactly why we rely on high-quality and breathable materials. In addition, our ventilation zones (the “ears” on the mirrors) ensure that moisture can escape quickly.
How waterproof is the MYCOVER motorcycle cover?
The MYCOVER motorcycle cover is designed to reliably protect your motorcycle from rain, snow and moisture – both in everyday use and during longer periods of outdoor storage.
The weather protection is created by the water-repellent coated material in combination with a custom fit and functional details that effectively repel rain and allow it to run off.
Transportation options
Does transport work with a cover on a trailer?
Currently, there is no cover that is officially approved for use on a trailer. Due to the increased and uncontrollable wind forces, there is always a risk that the cover will tear. Should this happen while driving and cause an accident – for example, by obstructing the view of a following vehicle – this could be considered intentional, which is usually not insured. We therefore accept no liability whatsoever and expressly reject any liability claims.
Nevertheless, a cover is often used on trailers. Although our models are among the most tear-resistant on the market, it is essential to additionally secure the cover with transport straps. The keyhole openings incorporated into the cover are solely for preventing manual tearing and are not designed to secure against lifting during transport.
Recommended backup options
- Direct fixation with transport straps:
- If the cover is to be secured together with the motorcycle, additional openings for the transport straps must be incorporated into the cover.
- It is recommended to have these openings professionally reinforced and sewn by a tailor to avoid material tears.
- Retroactively pulling the cover over:
- Alternatively, the cover can be pulled over after the motorcycle has been lashed to the trailer.
- However, this can result in the tarpaulin no longer fitting snugly, as the transport straps run in the corners of the vehicle.
Additional fuse required
Regardless of the method chosen, the cover should always be additionally secured with a transport strap to prevent unintentional lifting during the journey.
Heat & UV
Does the exhaust need additional protection?
In principle, heat protection is recommended in the area of the exhaust manifold system and the end pot. However, there are exhaust systems where heat protection materials could cause scratches due to an incorrect fit or too much movement in the wind.
Sports & production motorcycles
With high-quality sports exhaust systems, which are usually made of stainless steel or carbon, there is no increased risk of scratching. These materials are resistant enough, so additional protection is usually not necessary.
Chopper & Custom-made products
With Chopper models, special care must be taken with exhausts that often cost several thousand euros and are provided with matte finishes. In these cases, it may be more sensible to forego additional heat protection in order to avoid scratches.
Heat development & melting points
A motorcycle exhaust can reach temperatures of up to 800°C under prolonged stress on the road. Since the melting points of common cover materials (nylon, polyamide, polyester) are between 220 and 280°C, the cover should not be put on immediately after the ride.
Recommended procedure
- Let the motorcycle cool down after the ride before using the cover.
- We recommend a waiting period of at least 10 minutes. This can take longer in midsummer.
- Safety warning: Direct skin contact with a hot end pot can cause severe burns.
Does a black cover heat up more than other colors?
In principle, dark colors absorb more solar radiation and can therefore heat up more than light colors. However, they also cool down faster in light breezes.
There is an air layer between the cover and the motorcycle, which acts as a thermal barrier. This means that the vehicle under the cover does not heat up as much as it would without protection. This is comparable to dark sun protection films on windows, which offer a protective function despite high absorption.
Further information:
ADAC heat test (comparison of materials and colors)
Survival compass (temperature behavior of colors in the sun)
Can the cover be put on immediately after driving?
We do not recommend putting on the cover immediately after the ride.
Why?
- High temperatures: An exhaust pipe can reach temperatures of up to 800°C under prolonged load.
- Material limits: The melting points of common cover materials (nylon, polyamide, polyester) are between 220 and 280°C.
- Risk of scratching: While there is no high risk of scratching with stainless steel or carbon exhaust systems, matte finishes on high-priced Chopper exhaust systems can be damaged by an incorrect fit or movement in the wind.
Recommended procedure
- Let the motorcycle cool down after the ride before using the cover.
- Wait at least 10 minutes before checking whether the muffler is already lukewarm.
- Caution: Direct skin contact with a hot exhaust pipe can cause severe burns!
Wind & storm
Can the cover prevent my motorcycle from falling over?
No, a cover cannot unfortunately prevent a motorcycle from tipping over in strong winds. Since the cover increases the surface area of the motorcycle, there is a higher wind resistance, which generally increases the susceptibility to wind.
Is the cover loud in the wind?
Our cover is made of extremely tear-resistant and dimensionally stable material that largely prevents annoying flapping noises, as occur with thin covers.
Is there additional protection against wind from below?
Yes, our cover has two securing straps in the lower area to largely prevent wind from entering. In addition, the robust material protects against friction damage and paint abrasion, as it does not flap uncontrollably.
Recommended positioning in wind & storm
In strong winds: We recommend additional securing, e.g. by lashing or a protected parking position.
Optimal: Position your motorcycle so that the front or rear is facing the wind, not the side. This minimizes wind resistance.
Rust
Why is my chain rusting and what can I do about it?
Rust on the chain is a widespread problem that affects many motorcyclists – similar to rust on bicycle chains or brake discs on cars. You can find more information on this topic on our page about rust. There you are guaranteed to find answers to your questions.
Lacquer
Are there any special features with coatings?
The composition of paints has changed significantly in recent years, which is why we cannot make any general statements on this. If you have any questions about your paint, we recommend that you contact the manufacturer directly.
Basic recommendations for paint protection:
- Matt paints are particularly sensitive and require special protection.
- A paint-friendly inner coating of the cover, as is the case with us, is essential to avoid scratches.
- An exact fit helps to minimize friction from wind and thus prevent damage to the paint. Therefore, check the size chart before buying.
If you have any further questions, we will be happy to advise you.
Durability & care
Can your covers be washed or cleaned?
We have not yet carried out any tests on the washability of our covers, which is why we generally advise against washing them in the washing machine. Mechanical stress can loosen the inner fleece. There is a risk that the washing machine will be damaged. We therefore recommend: hand cleaning with warm/lukewarm water, using a microfiber cloth, sponge or soft brush, or using professional tent/cover cleaner.
Successfully tested by customers:
Disclaimer: We assume no liability for the use of external cleaning agents. Please always observe the manufacturer’s instructions.
How long does the outdoor motorcycle cover last?
Our cover has been on the market for three years and has so far received excellent feedback from our customers.
We are confident that the planned lifespan of at least five years is realistic. In order to continuously check the quality and longevity, we regularly adjust our guarantee and warranty conditions.
We have currently increased our warranty period from the normal statutory warranty to 2 years.
Here you can find the current GTC
General
Is the lock bushing only on the front wheel or also on the rear wheel?
Yes, the lock openings are located both at the front and at the rear of the cover.
Our product images usually only show the front lock bushing, but both sides are equipped accordingly to enable flexible securing.
Can the cover be completely closed at the bottom?
No, the cover cannot be completely closed at the bottom.
A complete seal would cause moisture to accumulate in heavy rain instead of draining away. Our cover is designed to be optimally ventilated and still offer reliable protection.
Can a cord or zipper be installed at the bottom to close it completely?
No, we do not install a cord or zippers, as completely tightening the cover could cause moisture to collect inside. This would promote the formation of condensation, especially in heavy rain or high humidity.
Our cover is deliberately designed to remain breathable and its ventilation zones allow optimal air circulation.
What is the best way to put on the cover?
To ensure that the cover fits correctly and is easy to put on, follow the steps in our instructions. Here is the link to the instructions.
Can the covers be printed on?
Yes, printing is generally possible on our covers. However, we do not offer this service ourselves.
For customized printing, we recommend contacting a specialist printing service provider who has experience with water-repellent materials.
Can I also order the cover via Amazon?
In principle, yes, but we recommend that you order the cover directly from our shop.
Advantages for you:
- Lower prices, as we receive the full margin and there are no additional Amazon fees.
- Direct customer service for individual advice.
- Easy size exchange if your ordered size does not fit.
- Independence from Amazon – so we can continue to optimize our products directly for you.
Can I order a repair kit / set?
Yes, you can order a repair kit. Take a look here.
What is the pack size of the cover and does it fit in the side case?
The pack size of the cover corresponds to the dimensions of the transport bag:
Dimensions: 38 x 10 x 30 cm (in cm)
Whether the cover fits in your side case depends on its dimensions. Please compare these with the dimensions mentioned above.
Is the cover available without a license plate window?
No, we currently only offer the cover with a license plate window, and a version without a window is not currently planned. This is because the license plate must be visible at all times according to legal requirements and complete coverage would not be permitted.
I can’t get the cover back into the packaging. What can I do?
Please take a look at our folding instructions (PDF). This shows step by step how to fold the cover compactly.
Can the outdoor cover also be used indoors?
Yes, the outdoor cover can also be used indoors without any problems.
It protects the motorcycle not only from the elements, but also from dust and dirt when it is parked in a garage or hall. However, the indoor cover is of course more suitable here.
Does the license plate window let UV rays through?
Yes, the license plate window lets UV rays through, but this is usually irrelevant. Why?:
- Tires usually wear out through use before UV radiation can damage them.
- If there are still concerns, the tire can also be covered with a dark fabric, as dark colors absorb UV rays better than light colors.
Here is a link to the ADAC test with further information.
Personal contact for further questions
Before you contact us, please check whether there is already a current recommendation for your Motorcycle: > Here to the size recommendation <
You can reach us by email. You can also send us photos of your vehicle and we will reply within 48 hours: